Accelerator Pedal Position (APP) sensor — replacement
Caution: Do not apply any oil or spray lubricant to the APP sensor assembly, as this could damage the sensor.
Note: The APP sensor and the accelerator pedal are replaced as a single assembly.
1. Make sure the ignition key is in the Off position.
2. Disconnect the APP sensor electrical connector, then remove the mounting bolts (see illustration) and remove the sensor assembly.
i. 2 Accelerator Pedal Position (APP) sensor details
A Accelerator Pedal Position (APP) sensor
B Electrical connector
C Mounting bolts
3. Installation is the reverse of removal. Be sure to tighten the accelerator pedal assembly mounting bolts securely.