Headlight housing — replacement
Warning: These vehicles are equipped with halogen gas-filled headlight bulbs which are under pressure and may shatter if the surface is damaged or the bulb is dropped. Wear eye protection and handle the bulbs carefully, grasping only the base whenever possible. Do not touch the surface of the bulb with your fingers because the oil from your skin could cause it to overheat and fail prematurely. If you do touch the bulb surface, clean it with rubbing alcohol.
1. Remove the bumper cover (see Body).
2. Remove the retaining bolts, detach the housing and withdraw it from the vehicle (see illustrations). Unplug the electrical connectors.
i.2a With the bumper cover removed, remove the remaining two bolts at the top of the housing .
i.2b … and the bolt from the side
3. Installation is the reverse of removal. Be sure to check headlight adjustment (see Headlights — adjustment).